Convert-A-Ball Ball Mount Review - 2013 Ford F-250- Video

Today on our 2013 Ford F250, we'll be test fitting the Convert-A-Ball cushioned ball mount for 2-1/2" hitches, with a 3/4" rise or 2" drop, rated at 18,000 lbs., part number AMSCV-2. Before we begin our test fit, we will first need to obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. The hitch height of our vehicle is 20-1/4". Keep in mind that this measurement may vary due to hitch style, tire size, or other after-market accessories. We'll now begin our test fit in the drop position by sliding the shank of the ball mount into the opening of the hitch. more

Watch Video

7/17/2013 8:56:05 AM

Resse Titan Ball Mount Review - 2013 Ford F-250- Video

Today on our 2013 Ford F250 Super Duty, we'll be test fitting the Reese Titan ball mount for 2-1/2" hitch receivers, with a 3-1/2" rise or 5" drop, part number 45123. We'll begin our test fit by first obtaining the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. The hitch height for our vehicle is about 20-1/4". Keep in mind that this measurement may vary due to hitch style, tire size, or some after-market accessories. We'll now begin our test fit by sliding the shank of the ball mount in the drop position into the opening of the hitch and securing it with the pin and clip. more

Watch Video

7/16/2013 5:40:15 PM

MaxxTow Ball Mount Review - 2012 Ford F-250- Video

Today on our 2012 Ford F250 Super Duty we'll be test fitting the MaxxTow Ball Mount with Two Inch Accessory Receiver for Two Inch Hitches with a 2-1/4 Inch Drop rated at 5,000 pounds, part number mt70066. Now before we begin our test fit we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube.We get a measurement of about 21-1/2 inches. This measurement may vary due to tire size, hitch style or any other aftermarket accessories. To begin our test fit we'll simply slide the shank of the ball mount into the opening of the hitch, line up our pin holes and secure it to the hitch with the pin and clip.We'll now measure from the ground to the top of the ball platform and we'll get a measurement of about 19-1/2 inches. If the hitch height of your vehicle matches the hitch height of our vehicle and your trailer ride height which is the measurement from the ground to the bottom of your trailer's coupler while it is level matches this measurement this will be an appropriate ball mount for you.One great feature of this ball mount you can use a hitch-mounted bike rack or cargo carrier while you tow with this multipurpose ball mount. more

Watch Video

7/16/2013 10:32:59 AM

Draw-Tite Ball Mount Review - 2012 Ford F-250- Video

Today on our 2012 Ford F250 Super Duty, we'll be test fitting the Draw-Tite ball mount with a 3/4" rise or 2" drop, rated at 6,000 lbs., part number 2923. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube, and the hitch height of this vehicle is 21-1/2". This measurement may vary due to tire size, hitch style, or any after-market accessories. We'll now begin our test fit by sliding the shank of the ball mount into the opening of the hitch in the drop position, lining up our pin holes, and securing the ball mount to the hitch with the pin and clip. We'll now measure from the ground to the top of the ball platform, and we'll get a measurement of 19-1/2". more

Watch Video

7/16/2013 10:30:40 AM

Curt Tri-Ball Mount Review - 2012 Ford F-250- Video

Today on our 2012 Ford F250 Super Duty we'll be test fitting the Curt Tri-Ball Mount for 2 Inch Hitches, part number c45001. Now before we begin our test fit we'll first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube and we'll get a measurement of about 21-1/2 inches.This measurement may vary due to tire size, hitch style or any other aftermarket accessories. To begin our test fit we'll simply slide the shank of the ball mount into the opening of the hitch, line up the pin holes and secure to the hitch with a pin and clip. Now since this ball mount does not have a drop or a rise your trailer ride height which is the measurement from the ground to the bottom of your trailer's coupler while your trailer's level matches the hitch height of our vehicle then this ball mount would be appropriate for you.Now with this ball mount you do have the ability to rotate the shank to access the three different size balls; a 2 inch ball, a 1-7/8 inch ball and a 2-5/16 inch ball. That completes today's test fit for the Curt Tri-Ball Mount for 2 Inch Hitches, part number c45001 on our 2012 Ford F250 Super Duty.. more

Watch Video

7/16/2013 10:28:20 AM

Convert-A-Ball Cushioned Pintle Hook Combo Review - 2012 Ford F-250- Video

Today on our 2012 Ford F250 Super Duty, we'll be test fitting the Convert-a-Ball cushioned pintle hook combo with 3 nickle-plated balls for 2" hitches, rated at 6,000 lbs., part number PH2. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube, and we'll get a measurement of about 21-1/2". This measurement may vary due to tire size, hitch style, or any other after-market accessories. To begin our test fit, we'll slide the shank of the ball mount into the opening of the hitch, line up the pin holes, and secure it to the hitch with the pin and clip. Now since this ball mount does not have a drop or a rise, if the hitch height of your vehicle matches your trailer's ride height, which is the measurement from the ground to the bottom of your trailer's couple while your trailer is level, this would be an appropriate ball mount for you. more

Watch Video

7/16/2013 10:25:19 AM

Convert-A-Ball 6-Way Multi-Hitch Ball Mount Review - 2012 Ford F-250- Video

Today on our 2012 Ford F250 Super Duty well be test fitting the Convert-a-ball cushioned 6-way multi-hitch ball mount for 2-inch hitches rated at 10,000 pounds, part number cab-6w. Now before we begin our test fit we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube, and well get a measurement of about 21 inches. This measurement may vary due to tire size, hitch style, or any other after-market accessories. Well start off by simply sliding the shank of the ball mount into the opening of the hitch, and securing it to the hitch with a pin and clip. This cushioned ball mount provides six-way versatility with three ball sizes and the ability to receive a Linnet ring, spade, or clevis. more

Watch Video

7/16/2013 10:24:09 AM

Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2012 Ford F-250- Video

Today on our 2012 Ford F250 Super Duty we'll be test fitting the Convert-A-Ball Cushion Ball Mount for Two Inch Hitches with a 6-3/4 Inch Rise or 10 Inch Drop rated at 10,000 pounds, part number amsc8. Now before we begin our test fit we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube.We'll get a measurement of 21-1/2 inches. This measurement may vary due to tire size, hitch style or any other aftermarket accessories. Now to begin our test fit in the drop position we'll simply slide the shank of the ball mount into the opening of the hitch and secure the ball mount to the hitch with a pin and clip.We'll now measure from the ground to the top of the ball platform and we'll get a measurement of about 14 inches. If the hitch height of your vehicle matches the hitch height of our vehicle and your trailer ride height which is the measurement from the ground to the bottom of your trailer's coupler while it is level matches this measurement this will be an appropriate ball mount for you.We'll now flip the ball mount over to the rise position and again measure from the ground to the top of the ball platform and we'll get a measurement of about 28-1/2 inches. more

Watch Video

7/16/2013 10:23:39 AM

Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2012 Ford F-250- Video

Today on our 2012 Ford F250 Super Duty we'll be test fitting the Convert-A-Ball Cushion Ball Mount for Two Inch Hitches with one inch rise or two inch drop rated at 14,000 pounds, part number amsc2hd. Now before we begin our test fit we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube.We'll get a measurement of about 21-1/2 inches. This measurement may vary due to tire size, hitch style or any other aftermarket accessories. Now to begin our test fit, in the drop position we'll slide the shank of the ball mount into the opening of the hitch and secure the ball mount to the hitch with a pin and clip.We'll now measure from the ground to the top of the ball platform and we'll get a measurement of about 20 inches. Now if your hitch height matches the hitch height of this vehicle and your trailer ride height, which is the measurement from the ground to the bottom of your trailer's coupler while your trailer is level, matches this measurement this will be an appropriate ball mount for you.We'll now flip the ball mount over into the rise position and again measure from the ground to the top of the ball platform and we'll get a measurement of about 22-1/2 inches. more

Watch Video

7/16/2013 10:22:58 AM

Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2012 Ford F-250- Video

Today on our 2012 Ford F250 Super Duty we'll be test fitting the Convert-A-Ball cushioned ball mount for two-inch hitches with an 3/4 inch rise or two-inch drop rated at 10,000 pounds, part number AMSC2. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. We'll get a measurement of about 21-1/2 inches. This measurement may vary due to tire size, hitch style or any other after-market accessories. Now to begin our test fit we'll slide the shank of the ball mount into the opening of the hitch and secure the ball mount to the hitch with pin and clip. We'll now measure from the ground to the top of the ball platform and we'll get a measurement of about 20 inches. If the hitch height of your vehicle matches our hitch height and your trailer ride height, which is the measurement from the ground to the bottom of the coupler while your trailer is level matches this measurement this would be an appropriate ball mount for you. We'll now flip the ball mount over into the rise position and again measure from the ground to the top of the ball platform and well get a measurement of about 22-1/2 inches. more

Watch Video

7/16/2013 5:22:26 AM

MaxxTow Adjustable-Height Ball Mount Review - 2012 Ford F-250- Video

Today on our 2012 Ford F250 Super Duty well be test fitting the Maxxtow adjustable height ball mount for 2-inch hitches with a 10 inch drop or 8 inch rise rated at 5,000 pounds, part number mt70067. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube, and well get a measurement of about 21 inches. This measurement may vary due to tire size, hitch style, or any other aftermarket accessories. Now to begin our test fit in the drop position, well simply slide the shank of the ball mount into the opening of the hitch, line up our pin holes, and secure it with the pin and clip. Now in the drop position you can see that we can remove these two pins on the downward part of the ball mount to adjust the height of the ball platform as well as flipping it over to give us additional height. more

Watch Video

7/15/2013 11:43:38 AM

Diversi-Tech Adjustable Ball Mount Review - 2012 Ford F-250- Video

Today on our 2012 Ford F250 Super Duty well be test fitting the Diversi-Tech self-locking adjustable aluminum ball mount with two chrome balls with a six-inch drop or seven-inch rise rated at 10,000 pounds, part number dtalbm6600. Now before we begin our test fit, we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube, and well get a measurement of about 21 inches. This measurement may vary due to tire size, hitch style, or any other aftermarket accessories. Now to begin our test fit in the drop position, well simply slide the shank of the ball mount into the opening of the hitch, and turn the integrated key lock to bring out the pins located in the shank of the ball mount to secure it to the hitch. Now with the ball mount secured to the hitch we can use the key to raise and lower the ball platform of the ball mount, and also have the ability to switch it over to use the other size ball. more

Watch Video

7/15/2013 11:42:27 AM

Curt Multi-Ball Adjustable Ball Mount Review - 2012 Ford F-250- Video

Today on our 2012 Ford F250 Super Duty well be test fitting the Curt Multi-Ball adjustable ball mount for 2-inch hitches part number d900. Now before we begin our test fit we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube and well get a measurement of about 21 1/2 inches. This measurement may vary due to tire size, hitch style, or any other after-market accessories. To begin our test fit in the drop position well start off by sliding the shank into the opening of the hitch, and securing it to the hitch with the pin and clip. As you can see with the ball mount secured to the hitch, we can pull out the pin to access the different size balls as well as the other two pins on the downward part of the ball mount to adjust the height of the ball platform. more

Watch Video

7/15/2013 11:41:55 AM

Andersen Rapid Hitch Ball Mount Review - 2012 Ford F-250- Video

Today on our 2012 Ford F250 Super Duty well be test fitting the Rapid Hitch Adjustable Aluminum Ball Mount Kit with two chrome balls with a 5 inch drop, part number am3410. Now before we begin our test fit we will first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube and well get a measurement of about 21 inches. This measurement may vary due to tire size, hitch style or any other after-market accessories. Now to begin our test fit in the drop position, well simply slide the shank of the ball mount into the hitch and secure the ball mount to the hitch with the pin and clip. With the ball mount secured to the hitch, we now have the ability to raise and lower the platform up and down the mast of the ball mount as well as flipping it over to access the different size chrome balls. more

Watch Video

7/15/2013 11:39:52 AM

Draw-Tite Ball Mount Review - 2013 Ford Edge- Video

Today on our 2013 Ford Edge, well be test fitting the Draw-Tite Ball Mount part number 2923. We want to measure the hitch height, thats the ground to the inside top edge of our receiver tube. Keep in mind that this measurement will defer depending on exact model, tire size or any other attachment add-ons that you may have. The hitch height on our particular vehicle today is 13 inches. Now, we can go ahead and mount the ball.First, well mount it in the drop position. Well insert the shank and the receiver tube of our hitch. more

Watch Video

6/5/2013 4:30:09 PM

Curt Tri-Ball Mount Review - 2013 Ford Edge- Video

Today, on our 2013 Ford Edge well be test fitting the Curt Tri-Ball Mount part number c45001. To begin our test fit we need to go ahead and get our hitch height. This is from the ground to the inside top edge of our receiver tube. We have a hitch height of 13 1/2 inches.Now, we can go ahead and slide the shank of our ball mount into the opening of the receiver hitch tube. We can then go ahead and align the pin hole and then secure it with our pin and clip. We can then turn the tri-ball mount to either the left of the right side to access the 2 inch ball or the 1 7/8 inch ball. more

Watch Video

6/5/2013 4:29:43 PM

Diversi-Tech Adjustable Ball Mount Review - 2012 Ford F-150- Video

Today on our 2012 Ford F-150, we'll be test fitting the Diversi-Tech Self-Locking Adjustable Aluminum Ball Mount for 2-inch hitches with a 6-inch drop or 6-inch rise rated at 10,000 pounds, part number DTALBM6600. Now before we begin our test fit, we'll first need to obtain a hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. We'll get a measurement of 19-1/2 inches. This measurement may vary due to tire size, hitch style, or aftermarket accessories. To begin our test fit in the drop position, we'll slide the shank of the ball mount into the opening of the hitch. more

Watch Video

4/1/2013 10:26:54 AM

Curt Multi-Ball Adjustable Ball Mount Review - 2012 Ford F-150- Video

Today on our 2012 Ford F150 we'll be test fitting a Curt Multi-Ball Adjustable Ball Mount for 2" hitches, part number D900. Now before we begin our test fit, we'll first need to obtain the hitch height of our vehicle. The hitch height is the measurement from the ground to the inside top of the receiver tube. Our measurement is 19-1/2". This measurement may vary due to tire size, hitch style, or after-market accessories. Now to begin our test fit, in the rise position, we'll slide the shank of the ball mount into the opening of the hitch, line up our pin holes, insert our pin through our pin holes, and secure it with the clip on the other side. more

Watch Video

4/1/2013 10:26:47 AM

Draw-Tite Ball Mount Review - 2013 Ford Escape- Video

Today on our 2013 Ford Escape well be test fitting the Draw Tite ball mount with three quarter inch rise or two inch drop, rated at 6,000 pounds, part number 2923. Before fitting our ball mount to the vehicle well need to get our hitch height measurement. To do this well measure from the inside top edge of the hitch receiver tube to the ground. On this vehicle, that measurement is 14 inches. Keep in mind that measurement can change due to hitch style, tire size or any other accessory that may change your vehicles ride height, so its a good idea to measure yours. Well now go ahead and slide the ball mount shank into the hitch, line up the hitch pin hole and install a hitch pin and clip. more

Watch Video

1/23/2013 7:58:58 AM

Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2013 Ford Escape- Video

Today on our 2013 Ford Escape well be test fitting the cushioned ball mount for two inch hitches with three quarter rise or two inch drop from Convert-A-Ball. This is part number AMSC2. Before fitting our ball mount to the vehicle well first need to get our hitch height measurement. To do this well measure from the inside top edge of the hitch receiver tube to the ground. On this vehicle, that measurement is 14 inches. Keep in mind that measurement can change due to hitch style, tire size or any other accessory that may change your vehicles ride height, so its a good idea to measure yours. more

Watch Video

1/23/2013 7:58:54 AM

Draw-Tite Ball Mount Review - 2013 Ford F-150- Video

Today on our 2013 Ford F150 well be test fitting the Draw Tite ball mount for two inch hitches, part number 2923. Before we begin our test fit, we will first need to obtain a hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. Our measurement is 19 inches. This measurement may vary due to tire size and aftermarket accessories. Now well go ahead and slide the shank of the ball mount into the opening of the hitch in the drop position, align up our pin holes and secure it with the pin and clip. more

Watch Video

12/27/2012 11:30:02 AM

Curt Tri-Ball Mount Review - 2013 Ford F-150- Video

Today on our 2013 Ford F150 well be test fitting the Curt Tri ball mount for two inch hitches, part number C45001. Now before we begin our test fit well first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. Hitch height may vary due to tire size and aftermarket accessories. Our measurement is 19 inches. Well then slide the shank of the ball mount into the opening of the hitch, align up our pin holes and secure it with the pin and clip. more

Watch Video

12/27/2012 9:58:36 AM

Convert-A-Ball Ball Mount with 4 Inch Drop Review - 2013 Ford F-150- Video

more

Watch Video

12/27/2012 9:58:15 AM

Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2013 Ford F-150- Video

Today on our 2013 Ford F150 well be test fitting the Convert-a-ball cushion ball mount for two inch hitches, part number AMSC2HD. Now before we begin our test fit well first need to obtain the hitch height of our vehicle. This is the measurement from the ground to the inside top of the receiver tube. Ours measures 19 inches. This measurement may vary due to tire size and aftermarket accessories. Now well go ahead and slide the shank of the ball mount into the opening of the hitch in the drop position and secure it with a pin and clip. more

Watch Video

12/27/2012 9:58:12 AM

Convert-A-Ball 6-Way Multi-Hitch Ball Mount Review - 2012 Ford F-150- Video

Today we have a 2012 Ford F150 and were going to be test fitting the Convertible Cushion Six Way Ball Mount, part number CAB-6W. But before we can test fit our ball mount, first we want to measure the hitch height of our truck. To measure the hitch height, well measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 18-1/2 inches. First well show you how to mount the ball mount to the truck. Well insert the ball mount with the receiver tube of our hitch lined with the hitch pin holes and insert our pin and clip. more

Watch Video

7/11/2012 11:31:52 AM

Convert-A-Ball Ball Mount with 8 Inch Drop Review - 2012 Ford F-150- Video

Today we have a 2012 Ford F150 and were going to be test fitting the convertible cushion ball mount, part number AMSC8. But before we can test fit our ball mount first we want to measure the hitch height of our truck. To measure the hitch height, well measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 18-1/2 inches. To measure our new ball mount, first well mount it in the drop position. First well insert the ball mount into the receiver tube of the hitch. more

Watch Video

7/11/2012 11:31:36 AM

Convert-A-Ball Ball Mount with 4 Inch Drop Review - 2012 Ford F-150- Video

Today on our 2012 Ford F-150, we're going to be test fitting the Convert-A-Ball Cushion Ball Mount, part number AMSC4. But before we can test fit our ball mount, first we want to measure the hitch height of our truck. To measure the hitch height, we'll measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 18-1/2 inches. First, we're going to measure our ball mount in the drop position. We'll insert the ball mount into the receiver tube of the hitch, line up the hitch pin holes and secure it with a pin and clip. more

Watch Video

7/11/2012 11:31:19 AM

Convert-A-Ball Heavy Duty Ball Mount with 2 Inch Drop Review - 2012 Ford F-150- Video

Today, we have a 2012 Ford F-150 and we're going to be test fitting the Convert-A-Ball Ball Mount, part number AMSC2HD. But before we can test fit our ball mount, first we want to measure the hitch height of our truck. To measure the hitch height, we'll measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 18-1/2 inches. To test fit our ball mount or drawbar, we're going to insert the end of the receiver tube of our hitch. We'll line up the hitch pin holes and secure the drawbar with the pin. more

Watch Video

7/11/2012 11:31:03 AM

Convert-A-Ball Ball Mount with 2 Inch Drop Review - 2012 Ford F-150- Video

Today, we've got a 2012 Ford F-150 Four-door. We're going to be test fitting the Convert-A-Ball Cushion Ball Mount, part number AMSC2. But before we can test fit our ball mount, first we want to measure the hitch height of our truck. To measure the hitch height, we'll measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 18-1/2 inches. To test fit our ball mount, first we're going to use it in the drop position. more

Watch Video

7/11/2012 11:30:43 AM

Andersen Rapid Hitch Ball Mount Review - 2012 Ford F-150- Video

Today on our 2012 Ford F150, were going to be test fitting the Anderson Adjustable Rapid Hitch, part number AM3410. But before we can test fit our ball mount, first we want to measure the hitch height of our truck. To measure the hitch height well measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 18-1/2 inches. To test fit our ball mount kit well inert it into the receiver tube of our hitch, line up the hitch pin holes and secure it with the pin and clip. We have the ball set at the highest configuration. more

Watch Video

7/11/2012 11:30:28 AM

Draw-Tite Ball Mount Review - 2012 Ford F-150- Video

Today on our 2012 Ford F-150, were going to be test fitting the Draw-Tite Ball Mount, part number 2923. But before we can test fit our ball mount, first we want to measure the hitch height of our truck. To measure the hitch height, well measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 18-1/2 inches. Now, well test fit the drawbar. First, well place it in the drop position. more

Watch Video

6/25/2012 4:06:25 PM

Curt Tri-Ball Mount Review - 2012 Ford F-150- Video

Today on our 2012 Ford F-150 Four Door we're going to show you the Curt Tri-Ball Mount, part number C45001. This is the ball mount with three different ball sizes fixed to it. A 1-7/8 inch, a 2-inch and a 2-5/16 inch ball. But before we can test fit our ball mount, first we want to measure the hitch height of our truck. To measure the hitch height we'll measure from the ground to the inside top edge of our receiver tube. Our hitch height measures 18-1/2 inches. more

Watch Video

6/25/2012 4:06:12 PM

Convert-A-Ball Ball Mount with 10 Inch Drop Review - 2012 Ford F-150- Video

Today on our 2012 Ford F150, we're going to be test-fitting the Convert A Ball Cushion Ball Mount, part number AMSC10; but before we can test-fit our ball mount, first we want to measure the hitch hike of our truck. To measure the hitch hike, we'll measure from the ground to the inside top edge of our receiver tube. Our hitch hike measures 18-1/2 inches. To test our ball mount, first we're going to mount it in the drop position. We'll insert the shank of the ball-mount into the receiver tube of the hitch. We'll add the hitch pin holes and secure the ball mount with a pin and clip. more

Watch Video

6/25/2012 4:05:54 PM

  2